Genuine Sinotruk Oil Wheel Seal Rear 9-09724-018 – Unbreakable Hub Protection & Unmatched Driveline Integrity for Howo Heavy-Duty Trucks

Engineering Excellence Behind the 9-09724-018 Rear Wheel Seal

The 9-09724-018 oil wheel seal is not a simple rubber ring – it is a precision‑engineered sealing solution that plays a pivotal role in the longevity and reliability of your vehicle’s rear axle. Its single‑lip design is optimised for the specific operating conditions of wheel hubs, where high rotational speeds, heavy loads, and thermal cycling are common. The sealing lip is moulded from a specially compounded nitrile rubber that offers excellent resistance to petroleum‑based lubricants, high temperatures, and ozone.

The lip profile is engineered to maintain a precise interference fit with the axle shaft, creating a hydrodynamic oil film that reduces friction and wear while ensuring zero leakage. The integral metal case is coated with a corrosion‑resistant finish, and the outer diameter is designed for a press‑fit that eliminates the need for additional sealants. The garter spring, made from stainless steel, maintains consistent lip loading, compensating for minor shaft wear and ensuring a tight seal throughout the life of the component.

In typical Howo truck applications, the 9-09724-018 seal is installed in the rear axle hub, retaining gear oil within the hub and preventing it from contaminating the brake assembly. Its precise dimensions and robust construction guarantee a reliable seal, even under the extreme loads and vibrations encountered during heavy haulage and off‑road operation. Regular inspection of wheel seals for signs of leakage, hardening, or cracking, and prompt replacement with genuine Sinotruk 9-09724-018 units, is essential for preventing costly fluid loss, bearing damage, and brake contamination.

Technical Specifications – Oil Wheel Seal Rear 9-09724-018

Parameter	Specification
OEM Part Number	9-09724-018
Product Name	Oil Wheel Seal Rear
Brand	Sinotruk (Genuine OEM)
Inner Diameter (ID)	85 mm
Outer Diameter (OD)	110 mm
Thickness	12 mm
Material	Nitrile rubber (NBR) with metal casing
Hardness (Shore A)	72 ± 5
Temperature Range	-40°C to +120°C
Lip Type	Single (with garter spring)
Spring Material	Stainless steel
Application	Rear axle hub / wheel end
Compatible Models	Howo A7, T7, C7H, HW series; Sinotruk heavy‑duty trucks

Why the Genuine Sinotruk 9-09724-018 Outperforms Generic Wheel Seals

Generic wheel seals often use inferior rubber compounds that harden, crack, or swell when exposed to hot gear oil, leading to premature leakage and component failure. The 9-09724-018 is formulated with a high‑grade NBR compound that maintains its elasticity and sealing force even after thousands of heat cycles. Its precision‑moulded lip and consistent spring tension ensure reliable sealing, significantly extending the service life of the seal and the bearings it protects.

Moreover, the precise dimensional accuracy of the genuine Sinotruk seal ensures a perfect fit in the housing bore, eliminating the risk of leakage paths that can occur with poorly manufactured aftermarket seals. The stainless steel garter spring provides consistent lip loading, compensating for minor shaft wear and ensuring a tight seal throughout the life of the component. By choosing the Sinotruk 9-09724-018, you protect your axle investment and minimise the risk of unplanned downtime.

Advanced Material Science for Long‑Term Durability

The NBR compound used in the 9-09724-018 is specially formulated to resist the aggressive additives found in modern gear oils. Its low‑temperature flexibility ensures that the seal maintains its sealing function even during cold starts, while its high‑temperature stability prevents hardening and cracking that can lead to oil leaks. The metal case is zinc‑plated to resist corrosion, ensuring that the seal remains securely seated in the housing bore even in humid environments.

Compatibility and Fitment

The 9-09724-018 is a direct replacement for the original rear wheel seal in a wide range of Sinotruk and Howo models. Its dimensions (85mm ID, 110mm OD, 12mm thickness) match the factory specifications exactly, ensuring a straightforward installation. Always verify the seal’s orientation and use a suitable installation tool to prevent damage to the sealing lip during assembly.

Explore the full range of genuine Howo Parts available for your fleet, including seals, bearings, and axle components. The 9-09724-018 oil wheel seal is an essential part of that ecosystem – and with Sinotruk’s original quality, you can be confident that your rear axle will remain leak‑free and reliable.

Installation Best Practices for the 9-09724-018

Proper installation of the 9-09724-018 wheel seal is critical for achieving optimum sealing performance. Begin by thoroughly cleaning the axle shaft and housing bore, removing any burrs, dirt, or old sealant. Apply a thin film of clean gear oil to the sealing lip to reduce friction during installation. Using a suitable seal driver or a press, carefully install the seal into the bore, ensuring that it is seated squarely and evenly. Avoid cocking the seal, as this can damage the lip and cause leakage.

During routine maintenance, inspect the 9-09724-018 seal for signs of leakage, hardening, or cracking. If any leakage is detected, replace the seal immediately with a new genuine unit to prevent fluid loss and potential bearing and brake contamination.

Built for Nigeria – Unyielding Sealing Performance in Harsh Environments

Nigeria’s hot, dusty, and often wet conditions place extreme demands on wheel seals. The 9-09724-018 is engineered to thrive in these environments, with a robust NBR construction that resists thermal degradation and chemical attack. Its precise sealing lip keeps abrasive dust and water out, while retaining vital lubricants, ensuring that your wheel bearings remain protected and your brake components stay clean.

Furthermore, the genuine Sinotruk seal reduces the risk of oil leaks that can lead to environmental contamination, safety hazards, and costly repairs. By choosing the Sinotruk 9-09724-018, fleet operators can improve vehicle uptime, reduce maintenance costs, and demonstrate a commitment to sustainability and operational excellence.

Protect Your Rear Axle with the Genuine 9-09724-018 Oil Wheel Seal

The 9-09724-018 Oil Wheel Seal Rear is a small but vital component that ensures the integrity and reliability of your Howo or Sinotruk truck’s rear axle. Its superior material, precision engineering, and exact OEM fitment make it the definitive choice for professional workshops and fleet operators. Every time you install a genuine Sinotruk 9-09724-018, you are safeguarding your investment, reducing downtime, and extending the life of your axle components.

Don’t compromise with generic seals that may not provide the same level of protection or durability. Insist on the genuine 9-09724-018 – the wheel seal trusted by experienced mechanics and fleet operators across Nigeria. With its proven performance in the most demanding conditions, this seal delivers the reliability and peace of mind you deserve.

Genuine Sinotruk 9-09724-018 – Engineered for excellence. Built for Africa. Trusted by professionals.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.