Genuine Sinotruk Air Reservoir Assembly WG9000360780 – Unmatched Air Storage & Uncompromised Brake Safety for Howo Trucks

Engineering Excellence Behind the WG9000360780 Air Reservoir

The WG9000360780 air reservoir assembly is a critical component that stores compressed air generated by the engine‑driven compressor, providing an immediate and sufficient supply for brake actuation, suspension adjustment, and other pneumatic functions. Its dual‑chamber design — with a main volume of 30 litres and a secondary 20‑litre chamber — allows for dedicated air supply to primary and secondary brake circuits, ensuring that a failure in one circuit does not compromise the other. This redundancy is essential for maintaining braking performance and meeting international safety standards.

In a typical Howo or Sinotruk heavy‑duty truck, the air reservoir is subjected to continuous pressure cycling, vibration, and exposure to moisture and contaminants. The WG9000360780 is constructed from high‑quality steel with a wall thickness of 4 mm, and all seams are welded using automated processes that ensure uniform penetration and strength. The interior is coated with a corrosion‑inhibiting compound that protects against rust, while the exterior is finished with a durable epoxy primer and topcoat that resists chipping and abrasion.

Nigerian operators often face extreme heat, high humidity, and dusty conditions that can accelerate corrosion and degrade air system components. The WG9000360780 is pressure‑tested to 18 bar (150% of working pressure) and is equipped with manual drain valves that allow for regular moisture purging, extending the life of the reservoir and downstream components. Its robust mounting brackets are designed to absorb chassis flex and prevent stress fractures, ensuring that the reservoir remains securely attached for the life of the vehicle.

Technical Specifications – Air Reservoir Assembly WG9000360780

Parameter	Specification
OEM Part Number	WG9000360780
Product Name	Air reservoir assembly (dual‑chamber)
Brand	Sinotruk (Genuine OEM)
Outer Diameter	310 mm
Total Capacity	30 L + 20 L (split chambers)
Wall Thickness	4.0 mm
Working Pressure	12 bar (174 psi)
Test Pressure	18 bar (261 psi)
Material	High‑strength steel, corrosion‑coated interior
Mounting	Heavy‑duty brackets (2 positions), bolt‑on
Ports	6 x G 1/2″ outlets, 2 x G 1/4″ drain
Drain Valves	Manual (push‑type)
Operating Temperature	-40°C to +80°C
Weight	18.5 kg
Compatible Models	Howo A7, T7, C7H; Sinotruk heavy‑duty air brake systems
Replacement Interval	Inspect annually; replace if corroded, leaking, or damaged

Why the Genuine Sinotruk WG9000360780 Outperforms Aftermarket Reservoirs

Aftermarket air reservoirs often use thinner steel, inferior welding, and inadequate corrosion protection that can lead to premature rust, pinhole leaks, or catastrophic failure. The WG9000360780, by contrast, is manufactured with a robotic welding process that ensures full penetration and consistent seam quality, while the internal coating is applied in a controlled environment to achieve uniform coverage. Its dual‑chamber design provides independent air storage for primary and secondary circuits, a feature often omitted or poorly executed in generic units.

Additionally, the WG9000360780 is equipped with heavy‑duty mounting brackets that are designed to match the chassis attachment points exactly, eliminating the need for modifications that can weaken the structure. The reservoir is also fitted with high‑quality brass drain valves that resist sticking and corrosion, ensuring that moisture can be effectively purged during routine maintenance. By choosing the genuine Sinotruk WG9000360780, you ensure that your air brake system has the storage capacity and integrity required for safe, reliable operation, reducing the risk of brake fade or failure on Nigeria’s demanding roads.

Superior Materials for Harsh Environments

The steel used in the WG9000360780 is a low‑carbon, high‑formability grade that is specially selected for its resistance to fatigue and impact. The corrosion‑resistant coating is a epoxy‑based compound that maintains its protective properties even under high humidity and salt‑spray conditions. These material choices ensure that the reservoir remains structurally sound and free from internal contamination for the life of the vehicle.

Easy Identification and Fitment

The WG9000360780 is clearly marked with the Sinotruk logo and part number, allowing for quick verification of authenticity. Its mounting hole spacing and port orientations match the original equipment exactly, so you can install it without modifications. The reservoir is supplied with new mounting bolts and drain valve extensions for a complete replacement.

Explore the full catalogue of genuine Howo Parts available for your fleet, including air reservoirs, dryers, and brake system components. The WG9000360780 air reservoir assembly is a vital part of that ecosystem — and with Sinotruk’s original quality, you ensure reliable air storage and maximum braking safety for your truck.

Installation Best Practices for the WG9000360780 Air Reservoir

Replacing an air reservoir should be performed with the air system fully depressurised. Disconnect all air lines and electrical connections (if equipped), then remove the mounting bolts. Carefully lower the old reservoir and position the new WG9000360780 unit, securing it with the supplied hardware and torquing the bolts to 45‑50 N·m. Reconnect the air lines to the correct ports, ensuring that the primary circuit (30 L) is connected to the front brake and secondary (20 L) to the rear, as per the original configuration.

After installation, pressurise the system and check for leaks at all fittings and welds using a soap solution. Open the drain valves to purge any moisture that may have accumulated during installation. For Nigerian workshops, keeping a WG9000360780 in stock allows you to quickly address reservoir corrosion or damage, restoring full air system capacity and safety with minimal downtime.

Built for Nigeria – Uncompromised Air Storage on the Toughest Roads

Nigeria’s challenging road conditions — extreme heat, heavy loads, and frequent stop‑and‑go traffic — place immense demands on air brake systems. The WG9000360780 air reservoir assembly is engineered to meet these demands, with its generous 50‑litre total capacity, robust steel construction, and corrosion‑resistant coating that ensures reliable air supply for multiple brake applications, even on long descents or in heavy traffic.

Moreover, the WG9000360780 is compatible with the full range of Sinotruk and Howo air brake configurations used in Nigeria, making it a versatile replacement part for mixed fleets. By choosing genuine Sinotruk air reservoirs, you reduce the risk of brake circuit failures, improve driver confidence, and lower overall maintenance costs.

Secure Your Brake Air Supply with the Genuine WG9000360780

The WG9000360780 air reservoir assembly is a critical component that directly influences braking performance, system responsiveness, and vehicle safety. Its superior materials, precision engineering, and exact OEM fitment make it the only choice for professional fleet maintenance. By installing a genuine Sinotruk WG9000360780, you ensure that your air brake system has the storage capacity and integrity to perform reliably, even in the most demanding situations.

Never compromise on air storage with inferior aftermarket reservoirs that can corrode, leak, or fail. Insist on the genuine WG9000360780 — the air reservoir assembly trusted by Nigeria’s leading fleet operators and workshops. With its proven durability and uncompromising quality, this component delivers the safety and reliability that keep your business moving forward.

Genuine Sinotruk WG9000360780 – Strength, capacity, and reliability for every brake application.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.