Genuine Sinotruk Clarifier Hose WG971919008 – Unstoppable Fluid Flow & Unmatched Durability for Howo Trucks

Engineering Excellence Behind the WG971919008 Clarifier Hose

The WG971919008 clarifier hose is a critical component that conveys fluids between the clarifier unit and other system elements, ensuring that contaminants are effectively removed and that the fluid remains clean. Its inner tube is extruded from a specially formulated nitrile rubber that resists swelling and hardening from contact with hydraulic oils and other fluids, maintaining a smooth bore for unrestricted flow. The textile reinforcement provides high burst strength and kink resistance, while the outer cover is compounded with anti‑ozone additives to withstand prolonged exposure to sunlight and weather.

In a typical Howo or Sinotruk heavy‑duty truck, the clarifier hose is subjected to continuous pressure fluctuations, vibration, and mechanical abrasion from chassis contact. The WG971919008 is designed with a low‑friction inner surface that minimises pressure drop, ensuring that the clarifier receives a consistent supply of fluid. Its precision‑crimped end fittings are manufactured from corrosion‑resistant steel, providing a permanent, leak‑proof bond that withstands repeated assembly and disassembly without compromising seal integrity.

Nigerian roads, with their potholes, corrugations, and abrasive surfaces, demand hoses that can survive extreme flexing and impact. The WG971919008 is validated through rigorous dynamic flex testing, impulse pressure cycling, and salt‑spray corrosion testing, ensuring that it maintains its integrity and performance over the long term. Its high working pressure rating provides a substantial safety margin, giving fleet operators confidence in the reliability of their fluid systems.

Technical Specifications – Clarifier Hose WG971919008

Parameter	Specification
OEM Part Number	WG971919008
Product Name	Clarifier Hose (reinforced rubber)
Brand	Sinotruk (Genuine OEM)
Inner Diameter	16 mm (nominal)
Outer Diameter	25 mm
Length	1200 mm (with fittings)
Working Pressure	15 bar (continuous)
Burst Pressure	≥ 60 bar
Reinforcement	Textile braid
Inner Tube Material	Nitrile rubber (NBR)
Outer Cover Material	Ozone‑resistant synthetic rubber
End Fittings	Steel, zinc‑plated, swaged
Operating Temperature	-40°C to +90°C
Weight	0.65 kg
Compatible Models	Howo A7, T7, C7H; Sinotruk heavy‑duty trucks
Replacement Interval	Inspect every 50,000 km; replace if cracked, abraded, or leaking

Why the Genuine Sinotruk WG971919008 Outperforms Aftermarket Hoses

Aftermarket clarifier hoses often use lower‑grade rubber, insufficient reinforcement, and poor fitting crimping that can lead to premature cracking, bursting, or leakage. The WG971919008, by contrast, is manufactured with a high‑density textile braid that provides superior strength and flexibility, while the precision‑formed fittings are swaged to exact specifications, ensuring a permanent, leak‑free bond. Its inner tube is compounded to resist the deteriorating effects of oils and moisture, maintaining its integrity over the life of the vehicle.

Additionally, the WG971919008 is designed to resist abrasion from frame contact and road debris, thanks to its thick, tough outer cover. The hose’s UV‑stabilised compound prevents hardening and cracking from sunlight exposure, a common issue with lesser hoses in the Nigerian environment. By choosing the genuine Sinotruk WG971919008, you ensure that your clarifier system operates efficiently, with reduced risk of hose‑related failures that can lead to costly downtime or fluid contamination.

Superior Materials for Harsh Conditions

The nitrile inner tube is engineered to withstand contact with hydraulic fluids, water, and other contaminants, while the textile reinforcement provides exceptional strength without adding excessive weight. The outer cover is formulated with high‑performance antioxidants and ozone protectants, ensuring that the hose remains flexible and crack‑free even in the most challenging conditions.

Easy Identification and Fitment

The WG971919008 is clearly marked with the Sinotruk logo and part number, allowing for quick verification of authenticity. Its length and end fitting orientations match the original equipment exactly, so you can install it without modifications. The hose is supplied with the correct clamps and installation instructions for a hassle‑free replacement.

Explore the full catalogue of genuine Howo Parts available for your fleet, including clarifier hoses, filters, and fluid system components. The WG971919008 clarifier hose is a vital part of that ecosystem — and with Sinotruk’s original quality, you ensure reliable fluid transfer and maximum system efficiency for your truck.

Installation Best Practices for the WG971919008 Clarifier Hose

Replacing a clarifier hose is a straightforward procedure that should be performed with the system depressurised. Disconnect the old hose from its fittings, taking care to note the routing and orientation. Clean the fitting threads and install the new WG971919008 hose, tightening the nuts to the manufacturer’s specification (typically 15‑20 N·m). Ensure that the hose is routed away from sharp edges, hot surfaces, and moving parts, and that it is not twisted or excessively bent.

After installation, pressurise the system and check all connections for leaks using a soap solution. For Nigerian workshops, keeping a WG971919008 in stock allows you to quickly address hose wear or damage, restoring full system functionality with minimal downtime.

Built for Nigeria – Uncompromised Fluid Transfer on the Toughest Roads

Nigeria’s demanding operating environment — extreme heat, abrasive dust, and rough roads — places exceptional stress on fluid hoses. The WG971919008 clarifier hose is engineered to meet these challenges, with its robust construction, high‑pressure rating, and superior resistance to oil, ozone, and UV radiation, ensuring that your clarifier system operates reliably and efficiently.

Moreover, the WG971919008 is compatible with the full range of Sinotruk and Howo fluid systems used in Nigeria, making it a versatile replacement part for mixed fleets. By choosing genuine Sinotruk hoses, you reduce the risk of system failures, improve fluid cleanliness, and lower overall maintenance costs.

Secure Your Clarifier System with the Genuine WG971919008

The WG971919008 clarifier hose is a critical component that directly influences fluid cleanliness, system efficiency, and overall vehicle reliability. Its superior materials, precision engineering, and exact OEM fitment make it the only choice for professional fleet maintenance. By installing a genuine Sinotruk WG971919008, you ensure that your clarifier system delivers consistent, reliable performance, reducing the risk of contamination and component wear.

Never compromise on hose quality with inferior aftermarket alternatives that can crack, leak, or burst. Insist on the genuine WG971919008 — the clarifier hose trusted by Nigeria’s leading fleet operators and workshops. With its proven durability and uncompromising quality, this component delivers the safety and reliability that keep your business moving forward.

Genuine Sinotruk WG971919008 – Strength, reliability, and safety for every fluid pulse.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.