Ultimate Transmission Protection: 16Y-15-07000 Magnet Filter – Maximum Ferrous Debris Capture for Sinotruk Gearboxes
The Sinotruk Transmission Magnet Filter 16Y-15-07000 is a high‑efficiency magnetic filtration device specifically designed to capture ferrous wear particles from automatic and manual transmission fluid in heavy‑duty Sinotruk HOWO, A7, and STEYR trucks operating across Nigeria.
This genuine OEM filter, identified by the part number 16Y-15-07000, uses a powerful rare‑earth magnet encased in a stainless steel housing to attract and retain steel, iron, and alloy particles that cause gear wear, bearing damage, and valve body malfunction.
Trust this component to restore transmission cleanliness, prevent costly rebuilds, and keep your fleet moving reliably under Nigeria’s most punishing conditions.
Engineered for Nigeria’s Demanding Transmission Environments
The genuine Sinotruk magnet filter (OEM 16Y-15-07000) is a critical component that removes microscopic ferrous wear debris from automatic and manual transmission oil in HOWO, Sinotruk, and STEYR heavy trucks.
With over 50,000 Sinotruk trucks operating across Nigeria, reliable transmission filtration is essential for preventing gear pitting, bearing spalling, and valve body sticking.
This magnet filter is manufactured with a high‑grade neodymium magnet (Grade N42) capable of capturing particles down to 5 microns, a stainless steel mesh screen, and a reinforced plastic or metal housing, offering exceptional ferrous debris retention and flow capacity.
For Nigerian fleets battling transmission whine, hard shifting, or debris‑induced valve body failures due to normal wear and tear, the 16Y-15-07000 magnet filter provides a durable, factory‑fit solution that restores oil cleanliness and extends gearbox life.
By choosing the authentic filter, you eliminate circulating metal particles, reduce clutch wear, and prevent valve body scoring.
Each unit is factory‑tested for magnetic flux density, flow restriction, and pressure drop.
Nigerian fleet owners report smoother shifts, reduced transmission noise, and extended oil change intervals after installing genuine 16Y-15-07000 magnet filters.
This is a direct replacement for the original component, saving workshop hours and restoring factory transmission protection.
Request Genuine 16Y-15-07000 – Expert SupportWhy the 16Y-15-07000 Magnet Filter is Critical for Nigerian Transmission Reliability
Nigeria’s heavy loads, high ambient temperatures, and dusty conditions accelerate transmission wear, producing ferrous particles from gears, bearings, and synchronizers.
These particles circulate with the oil, acting as an abrasive lapping compound that accelerates wear and can lodge in valve body spools, causing erratic shifting.
The Sinotruk 16Y-15-07000 magnet filter is specifically engineered to capture these harmful particles.
Its neodymium magnet generates a surface field of over 3,000 Gauss, attracting and holding ferrous debris even at high oil flow rates.
The stainless steel mesh screen traps larger particles and prevents them from re‑entering the circuit.
For fleet managers in Lagos, Kano, and Port Harcourt, installing a genuine 16Y-15-07000 magnet filter translates to cleaner oil, reduced component wear, and extended transmission life.
A transmission without effective ferrous debris removal can suffer from bearing failure, gear tooth pitting, and valve body seizure within 200,000 km.
The 16Y-15-07000 eliminates these risks, providing a reliable magnetic filtration solution that keeps transmission oil clean and components protected.
Moreover, this magnet filter is fully compatible with Sinotruk HOWO 371, A7, STEYR manual transmissions, Fast gearboxes, and Allison automatic transmissions.
It directly replaces the original filter without modifications.
When you combine this filter with other genuine HOWO Parts — HOWO Parts — you ensure a complete, reliable transmission protection system that maximizes gearbox life and vehicle uptime.
The synergy of genuine components eliminates ferrous contamination, reduces wear rates, and extends oil drain intervals.
High‑Strength Magnet & Corrosion‑Resistant Housing
Each 16Y-15-07000 magnet filter is manufactured using a sintered neodymium‑iron‑boron (NdFeB) magnet, grade N42, with a maximum operating temperature of 150°C.
The magnet is encapsulated in a stainless steel or brass housing to prevent corrosion and chipping.
The filter body is made from reinforced engineering plastic or anodized aluminum, resistant to transmission fluid and thermal cycling.
For high‑mileage fleets, this means years of reliable service without magnetic degradation or housing cracking.
A counterfeit filter may use a weak ferrite magnet, plastic housing that warps, or lack the fine mesh screen, allowing particles to circulate.
The genuine 16Y-15-07000 eliminates these risks, providing a precision‑engineered magnet filter that restores factory transmission cleanliness and durability.
Technical Specifications – Magnet Filter 16Y-15-07000
| Parameter | Value / Detail |
|---|---|
| OEM / Part Number | 16Y-15-07000 |
| Product Type | Transmission Magnetic Filter (Ferrous Debris Trap) |
| Brand | Sinotruk (CNHTC) / Howo |
| Magnet Type | Neodymium (NdFeB), Grade N42 |
| Magnetic Flux Density | ≥ 3,000 Gauss at surface |
| Maximum Operating Temp. | 150°C (302°F) |
| Mesh Screen | Stainless steel, 100 mesh (150 microns) |
| Housing Material | Reinforced PA66 / die‑cast aluminum |
| Flow Rate (Max) | 40 L/min at 10 bar |
| Pressure Drop (Clean) | < 0.2 bar at rated flow |
| Ferrous Particle Capture | >95% of particles > 10 microns |
| Service Interval | Clean at every transmission oil change (50,000 km) |
| Compatible Transmissions | Fast 9/10/12‑speed, Allison 3000/4000 series, Sinotruk manual |
| Standards | ISO 16949, SAE J1858 |
Recognized Across Continents – Multilingual Identification
Why Nigerian Fleets Trust the 16Y-15-07000 Magnet Filter
Powerful Ferrous Capture
3,000 Gauss neodymium magnet captures steel, iron, and alloy wear particles before they damage gears.
Protects Valve Bodies
Prevents metal debris from lodging in valve spools, eliminating erratic shifting and pressure loss.
Extends Oil Life
Removes abrasive particles that cause oil oxidation, allowing extended drain intervals.
Long Service Life
Corrosion‑resistant housing and permanent magnet provide years of reliable service.
Every genuine Sinotruk transmission magnet filter (OEM 16Y-15-07000) is backed by rigorous quality control — the trusted choice for Nigerian heavy transport operators seeking maximum gearbox protection and shift quality.
Installation & Cleaning Best Practices for Nigerian Workshops
To ensure optimal ferrous debris removal, follow these professional guidelines when servicing the 16Y-15-07000 magnet filter.
Drain the transmission oil and remove the oil pan.
Locate the magnet filter (usually mounted on the valve body or inside the pan).
Carefully remove the filter and inspect the accumulated sludge.
Clean the magnet and mesh screen using a lint‑free cloth and brake cleaner – never use compressed air alone, as it can blow debris into the environment.
Reinstall the filter with a new O‑ring (if applicable).
For severe‑duty applications, clean the magnet filter at every oil change (every 30,000–50,000 km).
Genuine vs. Counterfeit – Protecting Your Transmission Investment
Counterfeit magnet filters are common in Nigeria.
They use weak ferrite magnets (500 Gauss or less), plastic housings that crack, and no mesh screen, allowing particles to circulate.
Symptoms of a counterfeit filter include transmission whine, metallic oil, and valve body failure.
Always purchase the 16Y-15-07000 magnet filter from authorized Sinotruk distributors.
Genuine parts feature a strong neodymium magnet, consistent housing quality, and packaging with Sinotruk holograms.
Investing in the authentic filter prevents gear damage, bearing failure, and costly transmission rebuilds.
Moreover, the genuine 16Y-15-07000 comes with a 12‑month manufacturer warranty and technical support.
When combined with other genuine HOWO Parts, you achieve the transmission protection that aftermarket filters cannot match.
For fleet owners across West Africa, the slightly higher upfront cost of the 16Y-15-07000 pays back many times over in reduced transmission failures, lower oil consumption, and safer operation.
Compatibility & Cross-Reference Applications
The 16Y-15-07000 magnet filter is a direct replacement for the original Sinotruk part and is compatible with HOWO 371, Sinotruk A7, STEYR, and Shacman trucks equipped with Fast 9‑speed, 10‑speed, 12‑speed manual transmissions, and Allison 3000/4000 series automatics.
It is used on both 6×4 and 8×4 models, including tipper trucks, fuel tankers, cargo carriers, and heavy‑duty buses.
Nigerian workshops have successfully installed this filter on thousands of vehicles operating across Lagos, Kano, Onitsha, and Abuja.
Always verify the mounting location – in most cases, the 16Y-15-07000 fits all Sinotruk and HOWO transmissions with factory magnetic filter provisions.
For high‑mileage fleets, we recommend cleaning the magnet filter at every oil change and replacing it every 200,000 km or if the magnet housing is damaged.
Using genuine 16Y-15-07000 ensures that your transmission oil remains free of ferrous debris, preventing gear pitting and bearing spalling.
Our bulk supply chain in Lagos, Kano, Onitsha, and Abuja ensures fast delivery of authentic 16Y-15-07000 units, minimizing downtime and keeping your fleet moving.
In summary, the Sinotruk Transmission Magnet Filter 16Y-15-07000 is a vital component for gearbox longevity and shift quality.
Nigerian operating conditions demand effective ferrous debris removal, and this filter delivers powerful neodymium capture, robust construction, and long service life.
Whether you operate a single truck or a hundred, upgrading to the genuine 16Y-15-07000 reduces total cost per kilometer, prevents transmission failures, and keeps your fleet shifting smoothly.
Don’t settle for imitations — choose the magnet filter that West African fleet experts trust.
Additionally, the 16Y-15-07000 magnet filter has been proven in Nigerian operating conditions, with fleet operators reporting a dramatic reduction in transmission‑related breakdowns after switching to genuine Sinotruk filters.
The neodymium magnet retains its strength for decades, eliminating the need for replacement.
For fleet managers in Abuja, Onitsha, or Ibadan, installing the genuine filter means fewer emergency repairs, lower lubricant costs, and more predictable service intervals.
Every 16Y-15-07000 unit is manufactured under strict ISO/TS 16949 standards, ensuring batch‑to‑batch consistency.
The filter is tested for magnetic flux density, flow restriction, pressure drop, and corrosion resistance.
When you order the Sinotruk 16Y-15-07000, you receive a product that has passed a 100% quality audit and is ready for immediate installation.
It’s the magnet filter that Nigerian fleet owners trust for their most valuable assets — from tipper trucks hauling granite to fuel tankers navigating rural routes.
Choose the genuine 16Y-15-07000 and experience the Sinotruk difference in transmission protection.
Original Sinotruk aftermarket parts — certified quality for Nigerian roads. Always specify OEM 16Y-15-07000 for exact fitment and maximum transmission protection.
Packaging & Shipping
Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.
Secure Packaging
Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.
Dedicated Transport
We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.
Quality Inspection
Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.
Nationwide Distribution
Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.
Shipping Information for Nigerian Customers
• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)
• Express Delivery: 1-2 business days available for urgent orders
• Regional Coverage: We deliver to all 36 states including remote areas
• Tracking: All shipments include real-time tracking information
Upgrade Your Sinotruk Truck Today with Howo parts!
Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.
For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.
Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.
