Ultimate Engine Protection: 1017011-29DM Sinotruk Oil Filter – Superior Filtration for Nigerian Howo Trucks
The Sinotruk Oil Filter 1017011-29DM is a high‑efficiency spin‑on filtration component designed for Weichai, Sinotruk, and Cummins engines in HOWO, Sinotruk, and STEYR heavy trucks operating across Nigeria.
This genuine OEM filter, identified by the part number 1017011-29DM, is manufactured from high‑grade pleated synthetic media with a metal center tube and nitrile rubber anti‑drainback valve, providing exceptional dirt‑holding capacity and filtration efficiency.
Trust this component to remove abrasive contaminants, extend engine life, and keep your fleet running reliably under Nigeria’s most punishing conditions.
Engineered for Nigeria’s Harsh Lubrication Environments
The genuine Sinotruk oil filter (OEM 1017011-29DM) is a critical component that removes abrasive dust, soot, and wear metals from engine oil on HOWO, Sinotruk, and STEYR heavy trucks.
With over 50,000 Sinotruk trucks operating across Nigeria, reliable oil filtration is essential for preventing premature engine wear, reducing oil contamination, and maintaining power output.
This filter is manufactured from high‑grade pleated synthetic media with a metal center tube and a nitrile rubber anti‑drainback valve, offering high dust-holding capacity and 98% filtration efficiency at 20 microns.
For Nigerian fleets battling bearing wear, turbocharger damage, or sludge buildup due to poor filtration, the 1017011-29DM oil filter provides a durable, factory‑fit solution that restores engine protection and extends overhaul intervals.
By choosing the authentic filter, you eliminate contaminant circulation, reduce engine wear, and lower oil consumption.
Each unit is factory‑tested for efficiency, flow restriction, and burst strength.
Nigerian fleet owners report longer engine life, reduced turbocharger failures, and extended oil change intervals after installing genuine 1017011-29DM filters.
This is a direct replacement for the original component, saving workshop hours and restoring factory oil filtration protection.
Request Genuine 1017011-29DM – Expert SupportWhy the 1017011-29DM Oil Filter is Critical for Nigerian Engine Protection
Nigeria’s roads are often unpaved, kicking up clouds of laterite dust that contains highly abrasive silica particles.
These particles, if ingested into the engine through the crankcase ventilation or from contaminated oil, cause rapid wear of piston rings, cylinder liners, and turbocharger bearings.
The Sinotruk 1017011-29DM oil filter is specifically engineered to capture these contaminants.
Its multi‑layer pleated media offers 98% efficiency at 20 microns, ensuring that only clean oil reaches critical engine components.
The filter’s high dirt-holding capacity (up to 25 grams depending on conditions) allows for extended service intervals, reducing maintenance costs.
For fleet managers in Lagos, Kano, and Port Harcourt, installing a genuine 1017011-29DM oil filter translates to lower engine wear, reduced oil consumption, and fewer turbocharger failures.
A clogged or low‑quality filter can restrict oil flow, causing bearing starvation and catastrophic engine failure.
The 1017011-29DM eliminates these risks, providing a reliable filtration solution that keeps your engine lubricated with clean oil.
Moreover, this oil filter is fully compatible with Weichai WD615, WD618, WP10, WP12, WP13, Sinotruk MC series, and Cummins engines.
It directly replaces the original filter without modifications.
When you combine this filter with other genuine HOWO Parts — HOWO Parts — you ensure a complete, reliable lubrication system that maximizes engine life and performance.
The synergy of genuine components eliminates contaminant bypass, reduces sludge formation, and extends the life of the engine oil.
High‑Efficiency Media & Robust Construction
Each 1017011-29DM oil filter is manufactured using high‑grade pleated synthetic media with a water‑resistant resin treatment.
The media is pleated to maximize surface area, reducing oil flow restriction while increasing dirt-holding capacity.
The filter is assembled with a metal center tube and a nitrile rubber anti‑drainback valve that prevents oil from draining back into the pan when the engine is off, ensuring immediate lubrication on startup.
A bypass valve (cracking pressure 2.0–2.5 bar) allows oil to bypass a clogged filter to prevent starvation.
For high‑mileage fleets, this means reliable service for the full recommended change interval (typically 30,000–50,000 km with synthetic oil).
A counterfeit filter may use low‑grade paper that tears, have inadequate pleat density, or lack a proper anti‑drainback valve, allowing dry starts.
The genuine 1017011-29DM eliminates these risks, providing a precision‑engineered filter that restores factory oil filtration protection and durability.
Technical Specifications – Oil Filter 1017011-29DM
| Parameter | Value / Detail |
|---|---|
| OEM / Part Number | 1017011-29DM |
| Product Type | Spin‑on Engine Oil Filter |
| Brand | Sinotruk (CNHTC) / Howo |
| Media Type | High‑grade pleated synthetic / cellulose blend |
| Filtration Efficiency | 98% @ 20 microns (ISO 4548-12) |
| Dirt Holding Capacity | ≥ 25 g (ISO 4548-12) |
| Burst Pressure | ≥ 15 bar (217 psi) |
| Bypass Valve Cracking Pressure | 2.0 – 2.5 bar (29–36 psi) |
| Anti‑Drainback Valve | Yes, nitrile rubber |
| Seal Material | Nitrile rubber (NBR), temperature resistant |
| Temperature Range | -30°C to +120°C |
| Thread Size | M20 x 1.5 (OEM specification) |
| Compatible Engines | Weichai WD615/WD618/WP10/WP12/WP13, Sinotruk MC, Cummins |
Recognized Across Continents – Multilingual Identification
Why Nigerian Fleets Trust the 1017011-29DM Oil Filter
Superior Filtration
98% efficiency at 20 microns captures abrasive laterite dust and wear metals.
High Dirt Capacity
Pleated design holds up to 25g of contaminants, extending service intervals.
Anti‑Drainback Valve
Nitrile rubber valve prevents dry starts by retaining oil in the filter.
Extended Engine Life
Clean oil reduces bearing wear, turbo damage, and sludge formation.
Every genuine Sinotruk oil filter (OEM 1017011-29DM) is backed by rigorous quality control — the trusted choice for Nigerian heavy transport operators seeking maximum engine protection and longevity.
Installation Best Practices for Nigerian Workshops
To ensure optimal engine protection, follow these professional guidelines when installing the 1017011-29DM oil filter.
Drain the old oil while warm to suspend contaminants.
Clean the filter mounting surface thoroughly.
Apply a thin film of clean engine oil to the new filter’s rubber gasket.
Hand‑tighten the filter until the gasket contacts the base, then tighten an additional three‑quarters of a turn – never use a wrench to overtighten.
Fill the engine with the correct grade of oil (typically 15W‑40 or 5W‑30 synthetic).
Start the engine and check for leaks.
For severe‑duty applications, replace the filter at every oil change (every 30,000–50,000 km).
Genuine vs. Counterfeit – Protecting Your Engine Investment
Counterfeit oil filters are widespread in Nigeria.
They use low‑quality paper media that tears, inadequate bypass valves that open too early, and weak gaskets that leak.
Symptoms of a counterfeit filter include oil pressure warnings, increased engine noise, and accelerated oil darkening.
Always purchase the 1017011-29DM filter from authorized Sinotruk distributors.
Genuine parts feature a consistent pleat pattern, robust end caps, and packaging with Sinotruk holograms.
Investing in the authentic filter prevents premature engine wear, turbocharger failure, and costly rebuilds.
Moreover, the genuine 1017011-29DM comes with a 12‑month manufacturer warranty and technical support.
When combined with other genuine HOWO Parts, you achieve the engine protection that aftermarket filters cannot match.
For fleet owners across West Africa, the slightly higher upfront cost of the 1017011-29DM pays back many times over in reduced engine repairs, lower oil consumption, and longer engine life.
Compatibility & Cross-Reference Applications
The 1017011-29DM oil filter is a direct replacement for the original Sinotruk part and is compatible with HOWO 371, Sinotruk A7, STEYR, and Shacman trucks equipped with Weichai WD615, WD618, WP10, WP12, WP13, Sinotruk MC series, or Cummins engines.
It is used on both 6×4 and 8×4 models, including tipper trucks, fuel tankers, cargo carriers, and heavy‑duty buses.
Nigerian workshops have successfully installed this filter on thousands of vehicles operating across Lagos, Kano, Onitsha, and Abuja.
Always verify the thread size (M20 x 1.5) and gasket diameter – in most cases, the 1017011-29DM fits all Weichai‑powered Sinotruk and HOWO vehicles with standard oil filter heads.
For high‑mileage fleets, we recommend carrying spare filters on long trips and changing the filter at every oil change.
Using genuine 1017011-29DM ensures that your engine oil remains clean, reducing bearing wear and maximizing power output.
Our bulk supply chain in Lagos, Kano, Onitsha, and Abuja ensures fast delivery of authentic 1017011-29DM units, minimizing downtime and keeping your fleet moving.
In summary, the Sinotruk Oil Filter 1017011-29DM is a vital component for engine protection and longevity.
Nigerian dust conditions demand filters that can capture fine abrasive particles, and this filter delivers high‑efficiency media, robust construction, and long service life.
Whether you operate a single truck or a hundred, upgrading to the genuine 1017011-29DM reduces total cost per kilometer, prevents engine wear, and keeps your fleet running strong.
Don’t settle for imitations — choose the oil filter that West African fleet experts trust.
Additionally, the 1017011-29DM filter has been proven in Nigerian operating conditions, with fleet operators reporting a dramatic reduction in engine wear‑related failures after switching to genuine Sinotruk filters.
The high dirt‑holding capacity allows for extended intervals between changes, even in the dusty Harmattan season.
For fleet managers in Abuja, Onitsha, or Ibadan, installing the genuine filter means fewer engine repairs, lower oil consumption, and more predictable service intervals.
Every 1017011-29DM unit is manufactured under strict ISO/TS 16949 standards, ensuring batch‑to‑batch consistency.
The filter is tested for filtration efficiency, flow restriction, dirt holding capacity, and burst strength.
When you order the Sinotruk 1017011-29DM, you receive a product that has passed a 100% quality audit and is ready for immediate installation.
It’s the oil filter that Nigerian fleet owners trust for their most valuable assets — from tipper trucks hauling granite to fuel tankers navigating rural routes.
Choose the genuine 1017011-29DM and experience the Sinotruk difference in engine protection.
Original Sinotruk aftermarket parts — certified quality for Nigerian roads. Always specify OEM 1017011-29DM for exact fitment and maximum engine protection.
Packaging & Shipping
Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.
Secure Packaging
Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.
Dedicated Transport
We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.
Quality Inspection
Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.
Nationwide Distribution
Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.
Shipping Information for Nigerian Customers
• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)
• Express Delivery: 1-2 business days available for urgent orders
• Regional Coverage: We deliver to all 36 states including remote areas
• Tracking: All shipments include real-time tracking information
Upgrade Your Sinotruk Truck Today with Howo parts!
Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.
For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.
Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.
