Genuine Sinotruk Gearbox Rear Mounting Pad 56-01-002 – Unrivaled Stability for Drivetrain Alignment

Engineering Excellence Behind the 56-01-002 Gearbox Mounting Pad

The 56-01-002 mounting pad is more than a simple rubber block — it is a carefully engineered vibration isolation and alignment component that directly influences drivetrain longevity and ride comfort. Its steel core provides the necessary strength to support the weight of the transmission (typically over 300 kg), while the bonded elastomer layer absorbs torsional vibrations, axial thrust, and radial movements that occur during acceleration, braking, and gear shifting.

In a typical Howo 6×4 or 8×4 truck, the gearbox rear mount 56-01-002 is subjected to continuous dynamic loads, high temperatures from the exhaust and engine, and exposure to oil, grease, and road splash. The compound used in this mounting pad is specifically formulated to resist swelling, hardening, and cracking — ensuring consistent damping properties over the life of the vehicle.

Nigerian roads, with their combination of potholes, corrugations, and heavy traffic, cause constant drivetrain movement. The 56-01-002 effectively limits this movement to the designed envelope, preventing misalignment of the propeller shaft, reducing u-joint wear, and protecting the gearbox output shaft seal from premature failure. Its precision-engineered height and durometer ensure that the driveline angle remains within the optimal range, minimising vibration and noise transmitted to the cab.

Technical Specifications – Gearbox Rear Mounting Pad 56-01-002

Parameter	Specification
OEM Part Number	56-01-002
Product Name	Gearbox rear mounting pad (transmission mount)
Brand	Sinotruk (Genuine OEM)
Material	Natural rubber / synthetic blend, steel core
Hardness (Shore A)	65 ± 5
Load Capacity (static)	500 kg (nominal)
Deflection (max load)	6.0 mm ± 1.5 mm
Operating Temperature	-30°C to +110°C
Elastomer Type	Ozone and oil-resistant compound
Bonding	Metal-to-rubber vulcanised bond
Mounting Hole Pattern	2 x M12 through-holes, 82 mm spacing
Overall Height	72 mm
Compatible Models	Howo HW series, A7, T7, C7H; Sinotruk 6×4, 8×4, 4×2
Replacement Interval	Inspect every 80,000 km; replace if cracks, compression set, or severe oil contamination noted

Why the Genuine Sinotruk 56-01-002 Outperforms Generic Mounting Pads

Aftermarket mounting pads often use inferior rubber compounds that harden, crack, or collapse under the combined effects of heat, oil, and dynamic loading. The 56-01-002, by contrast, is manufactured using a proprietary elastomer blend that maintains its elasticity and damping properties over a wide temperature range. Its steel core is precision-stamped and coated to resist corrosion, while the rubber-to-metal bond is achieved through a controlled vulcanisation process that ensures maximum adhesion and durability.

Moreover, the 56-01-002 is designed to match the exact height and durometer of the original equipment, ensuring that the driveline angle is maintained within the critical tolerance of ±0.5 degrees. This prevents premature wear of the centre bearing, universal joints, and slip yoke — common failure points when incorrect mounts are fitted. By choosing the genuine Sinotruk 56-01-002, you eliminate these risks and ensure that your transmission remains properly supported and aligned.

Superior Material Science for Nigerian Operating Conditions

The rubber compound used in the 56-01-002 is formulated with anti-oxidants and anti-ozonants that protect against the aggressive effects of high ambient temperatures, UV radiation, and chemical attack from oil and diesel spills. Its resistance to compression set ensures that the mount does not sag over time, maintaining its designed height and load-carrying capacity. This is particularly important for Nigerian trucks that often operate at or near maximum gross vehicle weight.

Compatibility Across Howo and Sinotruk Transmissions

The 56-01-002 is a direct replacement for the original rear mounting pad used on a wide range of Howo and Sinotruk models, including those fitted with HW18709, HW19710, and HW20716 gearboxes. It is also used in A7 and T7 series tractors. Its bolt pattern and overall dimensions match OEM specifications, so you can install it without modifications — just remove the old mount, clean the mounting surfaces, and fit the new 56-01-002 with the recommended torque.

Explore the full catalogue of genuine Howo Parts available for your fleet, including engine mounts, transmission components, and driveline hardware. The 56-01-002 gearbox rear mounting pad is a vital part of that ecosystem — and with Sinotruk’s original quality, you ensure that your drivetrain remains stable, quiet, and reliable, kilometre after kilometre.

Installation Best Practices for the 56-01-002 Mounting Pad

Correct installation of the 56-01-002 is essential for optimal performance. Always support the gearbox with a suitable jack before removing the old mount. Clean the chassis mounting surfaces and the gearbox bracket, removing any debris, rust, or old adhesive. Inspect the mounting bolts for wear or thread damage and replace if necessary.

Fit the new 56-01-002 into position, ensuring that the locating dowels (if present) align correctly. Torque the mounting bolts to the manufacturer’s specification — typically 120–140 N·m for M12 bolts. Lower the gearbox slowly and check that the mount is not twisted or preloaded. After installation, start the engine and engage the clutch to verify that there is no excessive movement or abnormal vibration. For Nigerian workshops, keeping a stock of 56-01-002 mounts ensures that you can address worn mounts promptly, preventing secondary damage to u-joints and centre bearings.

Built for Nigeria – Unwavering Support for Heavy-Duty Operations

Nigeria’s transport industry faces some of the most extreme operating conditions on the continent — from the humid coastal cities to the arid Sahel, with roads that challenge every suspension and drivetrain component. The 56-01-002 mounting pad is specifically engineered to withstand these challenges, with its robust elastomer compound, corrosion-resistant steel core, and precise fitment that ensures the gearbox remains securely located even during hard braking and acceleration.

Furthermore, the 56-01-002 is fully compatible with the wide range of transmissions and clutches commonly found in Nigerian fleets. Its ability to absorb and damp vibrations improves driver comfort, reduces fatigue, and protects sensitive electronic components (such as the ECU and transmission controllers) from excessive shock. By choosing the genuine Sinotruk 56-01-002, you are investing in the long-term reliability and safety of your fleet.

Secure Your Drivetrain with the Genuine 56-01-002

The 56-01-002 gearbox rear mounting pad is a small but critical component that directly affects your truck’s driveline alignment, vibration levels, and component longevity. Its superior materials, precise engineering, and exact OEM fitment make it the only logical choice for professional maintenance. By installing a genuine Sinotruk 56-01-002, you are protecting your gearbox output shaft, universal joints, and centre bearing from the damaging effects of misalignment and excessive movement.

Do not settle for generic mounts that may not provide the correct durometer, height, or load capacity. Insist on the genuine 56-01-002 — the mounting pad that is trusted by Nigeria’s leading fleet operators and workshops. With its proven durability and uncompromising quality, this component delivers the stable, quiet, and reliable drivetrain performance that keeps your business moving forward.

Genuine Sinotruk 56-01-002 – Stability, durability, and peace of mind for every gear change.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.