Genuine Sinotruk Oil Filter 810032118-0012 – Ultimate Engine Protection & Unmatched Filtration Efficiency for Howo Trucks

Engineering Excellence Behind the 810032118-0012 Oil Filter

The 810032118-0012 oil filter is not a simple canister – it is a precision-engineered filtration system that plays a vital role in the longevity and reliability of your engine. Manufactured to Sinotruk’s exacting OEM standards, this filter uses a proprietary multi-layer cellulose/synthetic blend media that offers an optimal balance of high dirt-holding capacity and low flow restriction. The media is pleated to maximize surface area, ensuring that the filter can capture a large volume of contaminants without becoming clogged, which could otherwise lead to oil starvation and engine damage.

The filter’s bypass valve is calibrated to open at a precise pressure differential, ensuring that oil continues to flow even if the filter becomes severely clogged, protecting the engine from oil starvation while still maintaining reasonable filtration. The anti-drain-back valve prevents oil from draining out of the filter when the engine is off, ensuring immediate oil pressure on start-up – a critical feature for reducing cold-start wear in heavy-duty diesel engines.

In typical Howo truck applications, the 810032118-0012 is installed in the main oil gallery, filtering all oil that flows to the engine’s critical wear surfaces. Its high-efficiency media ensures that contaminants such as soot, metal particles, and sludge are effectively removed, maintaining oil quality and extending the interval between oil changes – a significant cost-saving benefit for fleet operators.

Technical Specifications – Oil Filter 810032118-0012

Parameter	Specification
OEM Part Number	810032118-0012
Product Name	Oil Filter (Spin-on type)
Brand	Sinotruk (Genuine OEM)
Filtration Media	Multi-layer cellulose/synthetic blend
Micron Rating (β≥200)	10 µm (nominal)
Dirt Holding Capacity	≥ 45 g (ISO 16889)
Max Flow Rate	120 L/min
Bypass Valve Setting	1.2 bar ± 0.2 bar
Anti-Drain Valve	Yes (silicone-based)
Operating Temperature	-40°C to +120°C
Housing Material	High-strength steel with zinc-nickel coating
Thread Size	M22 x 1.5
Application	Engine lubrication system
Compatible Models	Howo A7, T7, C7H, HW series; Sinotruk heavy-duty trucks

Why the Genuine Sinotruk 810032118-0012 Outperforms Generic Oil Filters

Generic oil filters often use lower-quality media that fails to capture fine particles, leading to increased engine wear and reduced oil life. The 810032118-0012, with its advanced multi-layer media and precision-engineered bypass valve, delivers consistent filtration performance over the entire service interval. Its high dirt-holding capacity means that it can retain more contaminants without clogging, ensuring that oil pressure remains stable and that the engine receives a clean oil supply at all times.

Additionally, the anti-drain-back valve in the 810032118-0012 is made from high-quality silicone, which remains flexible and effective even at low temperatures, preventing dry starts that can cause significant wear. Many generic filters use poor-quality rubber valves that become hard and brittle over time, allowing oil to drain back and causing a delay in oil pressure build-up on start-up.

Advanced Media Technology for Maximum Protection

The filtration media used in the 810032118-0012 is engineered to provide both high efficiency and high capacity. The cellulose layer captures large particles, while the synthetic layer traps finer contaminants, ensuring that oil is clean and free from abrasive particles that can cause scoring and pitting on engine surfaces. This dual-layer design also helps to control the flow of oil, reducing pressure drop and maintaining consistent oil pressure under all operating conditions.

Compatibility and Fitment

The 810032118-0012 is a direct replacement for the original oil filter in a wide range of Sinotruk and Howo models. Its M22x1.5 thread and standard gasket size ensure a perfect seal on the filter housing. Always verify that the filter’s dimensions and thread size match your vehicle’s specifications, and never use a filter that does not fit correctly, as this can lead to leaks or poor filtration performance.

Explore the full range of genuine Howo Parts available for your fleet, including engine components, lubrication systems, and maintenance accessories. The 810032118-0012 oil filter is an essential part of that ecosystem – and with Sinotruk’s original quality, you can be confident that your engine will receive the protection it deserves.

Installation Best Practices for the 810032118-0012

Proper installation of the 810032118-0012 is straightforward but essential for achieving optimal performance. Begin by warming the engine slightly to make oil less viscous, then drain the old oil and remove the old filter using a suitable filter wrench. Clean the filter mounting surface and apply a thin film of fresh engine oil to the new filter’s gasket. Screw the new filter onto the housing until the gasket makes contact, then tighten it an additional ¾ to 1 turn (or as specified in your vehicle’s manual). Refill the engine with the recommended oil, start the engine, and check for leaks.

Regular inspection of the 810032118-0012 is not required, but it should be replaced at every oil change interval as recommended by the manufacturer. Always use a genuine Sinotruk 810032118-0012 when replacing the filter to ensure continued engine protection and warranty compliance.

Built for Nigeria – Unmatched Engine Protection in Harsh Environments

Nigeria’s heavy-duty trucking industry faces extreme conditions: high ambient temperatures, dusty roads, and heavy loads that place immense stress on engines. The 810032118-0012 is engineered to thrive in these conditions. Its high-efficiency media and robust construction ensure that it continues to remove contaminants effectively, even when operating in dusty, hot environments where oil degradation is accelerated.

Furthermore, the filter’s bypass valve is calibrated to handle the higher viscosity of oil at start-up, ensuring that oil flows freely even on cold mornings, reducing the risk of oil starvation during warm-up. By choosing the genuine Sinotruk 810032118-0012, fleet operators can extend engine life, reduce maintenance costs, and improve overall vehicle reliability.

Protect Your Engine with the Genuine 810032118-0012 Oil Filter

The 810032118-0012 Oil Filter is a small but critical component that ensures the long-term health and performance of your Howo or Sinotruk truck’s engine. Its superior filtration media, precision engineering, and robust construction make it the definitive choice for professional workshops and fleet managers. Every time you install a genuine Sinotruk 810032118-0012, you are protecting your investment and ensuring that your engine continues to deliver peak performance.

Don’t compromise with generic filters that may not provide the same level of protection and durability. Insist on the genuine 810032118-0012 – the oil filter trusted by experienced mechanics and fleet operators across Nigeria. With its proven performance in heavy-duty applications, this filter delivers the reliability and peace of mind you deserve.

Genuine Sinotruk 810032118-0012 – Engineered for excellence. Built for Africa. Trusted by professionals.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.