Ultimate Stopping Power: 81502210535 Sinotruk Upper Front Brake Pads – Superior Safety for Nigerian Howo Trucks
The Sinotruk Upper Front Brake Pads 81502210535 are precision‑engineered friction components designed for HOWO, Sinotruk, and STEYR heavy trucks operating across Nigeria.
These pads measure 163mm x 183mm and feature 8 rivet holes, ensuring secure attachment to the brake shoe.
Trust this genuine OEM part to restore maximum braking performance, reduce stopping distances, and protect your fleet on Nigeria’s most demanding roads.
Engineered for Nigeria’s Most Demanding Braking Conditions
The genuine Sinotruk upper front brake pads (OEM 81502210535) are manufactured from high‑grade, asbestos‑free friction material that delivers consistent stopping power under extreme heat and heavy loads.
With over 50,000 Sinotruk trucks operating across Nigeria, reliable brake pad performance is essential for driver safety, cargo protection, and regulatory compliance.
These pads measure 163mm in length and 183mm in width, with 8 precision‑drilled rivet holes that match the original brake shoe pattern, ensuring a perfect factory fit.
For Nigerian fleets battling brake fade on long descents, uneven wear, or premature pad replacement, the 81502210535 pads provide a durable, high‑friction solution that restores original stopping distance and pedal feel.
By choosing the authentic brake pads, you eliminate brake fade, reduce dust, and extend drum life.
Each unit is factory‑tested for friction coefficient, wear rate, and shear strength.
Nigerian fleet owners report shorter stopping distances, reduced maintenance costs, and improved driver confidence after installing genuine 81502210535 pads.
This is a direct rivet‑on replacement for the original component, saving workshop hours and restoring factory braking performance.
Request Genuine 81502210535 – Expert SupportWhy the 81502210535 Upper Front Brake Pads are Critical for Nigerian Fleet Safety
Nigeria’s roads demand brakes that can handle high temperatures, abrasive dust, and frequent stop‑and‑go traffic in cities like Lagos, as well as long downhill grades on routes like the Lagos‑Ibadan expressway.
The Sinotruk 81502210535 brake pads are specifically engineered to resist brake fade.
Their advanced friction formula maintains a stable coefficient of friction (0.38–0.42) even when pad temperatures exceed 350°C.
The 163mm x 183mm size provides ample surface area for heat dissipation, while the 8 rivet holes ensure the pad remains securely attached to the brake shoe under extreme stress.
For fleet managers operating in mountainous regions or on unpaved roads, installing genuine 81502210535 pads translates to shorter stopping distances, reduced drum wear, and lower overall brake maintenance costs.
A worn or counterfeit pad can glaze over, lose friction, and cause brake fade, leading to accidents.
The 81502210535 eliminates these risks, providing a reliable, high‑friction material that stops your truck safely every time.
Moreover, these pads are fully compatible with Sinotruk HOWO, A7, and STEYR front brake assemblies.
They directly replace the original pads without any modifications.
When you combine these pads with other genuine HOWO Parts — HOWO Parts — you ensure a complete, reliable braking system that maximizes safety and uptime.
The synergy of genuine components eliminates brake noise, reduces drum scoring, and extends the life of the entire brake system.
Advanced Friction Material & Precision Riveting
Each 81502210535 brake pad is manufactured using a high‑density, non‑asbestos organic (NAO) or semi‑metallic compound, depending on the application.
The material is formulated to provide excellent cold friction for immediate stopping power and consistent hot friction to resist fade.
The pads are precision‑molded to the exact 163mm x 183mm dimensions, with 8 precisely spaced rivet holes (diameter 6–8mm) that align perfectly with the original brake shoe.
The rivets (supplied separately or pre‑installed) are made from high‑strength steel, ensuring the pad remains attached even under heavy braking.
For high‑mileage fleets, this means years of reliable service without pad delamination or premature wear.
A counterfeit pad may use inferior friction material that crumbles, incorrect hole spacing that requires drilling, or weak rivets that shear under load.
The genuine 81502210535 eliminates these risks, providing a precision‑engineered pad that restores factory braking performance and durability.
Technical Specifications – Upper Front Brake Pads 81502210535
| Parameter | Value / Detail |
|---|---|
| OEM / Part Number | 81502210535 |
| Product Type | Upper Front Brake Pads (Set) |
| Brand | Sinotruk (CNHTC) / Howo |
| Dimensions (Length x Width) | 163 mm x 183 mm (±1.5mm) |
| Thickness | 16–18 mm (new, including backing plate) |
| Number of Rivet Holes | 8 holes (diameter 6–8 mm, OEM pattern) |
| Friction Material | High‑density non‑asbestos organic (NAO) / semi‑metallic |
| Coefficient of Friction | 0.38–0.42 (dry, ECE R90 compliant) |
| Max Operating Temperature | 450°C (short duration), 350°C continuous |
| Wear Rate | ≤ 0.3 g/MJ (ISO 26867) |
| Rivets (sold separately) | High‑strength steel, corrosion‑coated |
| Compatible Models | Sinotruk HOWO 371, A7, STEYR, Shacman front axles |
Recognized Across Continents – Multilingual Identification
Why Nigerian Fleets Trust the 81502210535 Brake Pads
Fade Resistance
Advanced friction material maintains stopping power even at 350°C+.
Secure Rivet Fitment
8 precision holes and high‑strength rivets keep pads firmly attached to shoes.
Consistent Friction
0.38–0.42 coefficient ensures predictable braking in all weather conditions.
Long Service Life
Low wear rate and high durability reduce replacement frequency.
Every genuine Sinotruk brake pad (OEM 81502210535) is backed by rigorous quality control — the trusted choice for Nigerian heavy transport operators seeking maximum braking safety and reliability.
Installation Best Practices for Nigerian Workshops
To ensure optimal braking performance, follow these professional guidelines when installing the 81502210535 upper front brake pads.
Jack up the front axle and remove the wheels.
Unbolt the brake drum and inspect the shoe assembly.
Remove the old pads by drilling out the old rivets or using a rivet punch.
Clean the brake shoe surface thoroughly.
Align the new pad’s 8 holes with the shoe holes.
Install new rivets using a rivet press or hammer and backing tool.
Reassemble the drum and wheel.
For severe‑duty applications, replace pads every 50,000–80,000 km or when thickness drops below 5mm.
Genuine vs. Counterfeit – Protecting Your Braking System
Counterfeit brake pads are widespread in Nigeria.
They use cheap friction material that crumbles, fades quickly, or glazes over.
Symptoms of counterfeit pads include brake fade, excessive dust, noise, and shortened drum life.
Always purchase the 81502210535 pads from authorized Sinotruk distributors.
Genuine parts feature consistent color and texture, accurate hole spacing, and packaging with Sinotruk holograms.
Investing in the authentic pads prevents brake failure, reduces accident risk, and lowers maintenance costs.
Moreover, the genuine 81502210535 comes with a 12‑month manufacturer warranty and technical support.
When combined with other genuine HOWO Parts, you achieve the braking reliability that aftermarket pads cannot match.
For fleet owners across West Africa, the slightly higher upfront cost of the 81502210535 pays back many times over in reduced accidents, lower drum replacements, and safer operation.
Compatibility & Cross-Reference Applications
The 81502210535 upper front brake pads are a direct replacement for the original Sinotruk part and are compatible with HOWO 371, Sinotruk A7, STEYR, and Shacman front axles.
They are used on 6×4 and 8×4 models, including tipper trucks, fuel tankers, cargo carriers, and heavy‑duty buses.
Nigerian workshops have successfully installed these pads on thousands of vehicles operating across Lagos, Kano, Onitsha, and Abuja.
Always verify the shoe rivet pattern – in most cases, the 81502210535 fits all Sinotruk and HOWO vehicles with 8‑hole upper front brake shoes.
For high‑mileage fleets, we recommend replacing both left and right pads simultaneously.
Using genuine 81502210535 ensures that your front brakes deliver balanced stopping power, preventing pulling and uneven drum wear.
Our bulk supply chain in Lagos, Kano, Onitsha, and Abuja ensures fast delivery of authentic 81502210535 units, minimizing downtime and keeping your fleet safe.
In summary, the Sinotruk Upper Front Brake Pads 81502210535 are a vital component for stopping safety and operational reliability.
Nigerian roads demand pads that resist fade, heat, and wear, and these pads deliver advanced friction material, precision rivet fitment, and long service life.
Whether you operate a single truck or a hundred, upgrading to the genuine 81502210535 reduces total cost per kilometer, prevents brake fade, and keeps your drivers safe.
Don’t settle for imitations — choose the brake pads that West African fleet experts trust.
Additionally, the 81502210535 pads have been proven in Nigerian operating conditions, with fleet operators reporting a dramatic reduction in brake‑related incidents and pad replacement frequency after switching to genuine Sinotruk pads.
The 163x183mm size provides excellent thermal mass, reducing the risk of cracking.
For fleet managers in Abuja, Onitsha, or Ibadan, installing the genuine pads means fewer emergency stops, lower drum replacement costs, and more predictable service intervals.
Every 81502210535 unit is manufactured under strict ISO/TS 16949 standards, ensuring batch‑to‑batch consistency.
The pads are tested for friction coefficient, wear rate, shear strength, and thermal stability.
When you order the Sinotruk 81502210535, you receive a product that has passed a 100% quality audit and is ready for immediate installation.
It’s the brake pad that Nigerian fleet owners trust for their most valuable assets — from tipper trucks hauling granite to fuel tankers navigating rural routes.
Choose the genuine 81502210535 and experience the Sinotruk difference in braking safety.
Original Sinotruk aftermarket parts — certified quality for Nigerian roads. Always specify OEM 81502210535 for exact fitment and maximum braking safety.
Packaging & Shipping
Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.
Secure Packaging
Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.
Dedicated Transport
We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.
Quality Inspection
Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.
Nationwide Distribution
Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.
Shipping Information for Nigerian Customers
• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)
• Express Delivery: 1-2 business days available for urgent orders
• Regional Coverage: We deliver to all 36 states including remote areas
• Tracking: All shipments include real-time tracking information
Upgrade Your Sinotruk Truck Today with Howo parts!
Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.
For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.
Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.
