Genuine Sinotruk Oil Filter VG1500070005 – Unsurpassed Engine Protection & Unmatched Filtration Efficiency

Engineering Excellence Behind the VG1500070005 Oil Filter

The VG1500070005 oil filter is a critical component in maintaining the cleanliness and viscosity of your engine’s lubricating oil. Its multi‑layer filtration media combines cellulose fibres for high dirt‑holding capacity with synthetic fibres for improved efficiency and flow. This unique blend ensures that the filter captures a wide range of contaminant sizes, from large debris to fine abrasive particles that can cause accelerated wear.

In a typical Howo or Sinotruk heavy‑duty truck, the engine oil circulates under high pressure and temperature, carrying combustion by‑products, metallic wear particles, and external contaminants. The VG1500070005 is designed to maintain high flow rates even as it loads up with dirt, thanks to its pleated media design and low‑restriction construction. The integrated bypass valve opens only when the filter becomes excessively clogged, ensuring that oil continues to flow to critical engine components in emergencies, while the anti‑drain back valve prevents oil from draining back to the sump, eliminating dry starts.

Nigerian operators often face extended service intervals and severe duty cycles, which place exceptional demands on oil filters. The VG1500070005 is tested to meet Sinotruk’s rigorous durability standards, with a burst pressure rating that exceeds normal operating conditions and a filter life that matches the recommended oil change intervals. Its robust steel canister resists deformation from vibration and impact, ensuring that the filter maintains its structural integrity throughout its service life.

Technical Specifications – Oil Filter VG1500070005

Parameter	Specification
OEM Part Number	VG1500070005
Product Name	Oil Filter (spin‑on type)
Brand	Sinotruk (Genuine OEM)
Filtration Media	Cellulose‑synthetic blend, pleated
Micron Rating (nominal)	10 µm
Burst Pressure	≥ 25 bar
Bypass Valve Setting	2.5 bar ± 0.3 bar
Anti‑Drain Back Valve	Integrated silicone valve
Outer Diameter	108 mm
Height	180 mm
Thread Size	M22 x 1.5
Seal Type	O‑ring (nitrile)
Operating Temperature	-40°C to +120°C
Weight	0.85 kg
Compatible Engines	Sinotruk WP10, WP12, MC11, MC13; Howo heavy‑duty engines
Replacement Interval	As per engine manufacturer (typically 10,000‑15,000 km under severe duty)

Why the Genuine Sinotruk VG1500070005 Outperforms Aftermarket Oil Filters

Aftermarket oil filters often use lower‑grade filter media, inadequate bypass valves, and poor sealing that can lead to reduced filtration efficiency, oil bypass, or leaks. The VG1500070005, by contrast, is manufactured with high‑quality synthetic fibres that provide consistent pore size and excellent particle retention, even under high oil flow rates. Its precision‑calibrated bypass valve opens at the correct pressure, ensuring that unfiltered oil does not circulate during cold starts or high‑load conditions.

Additionally, the VG1500070005 features a silicone anti‑drain back valve that remains flexible at low temperatures, preventing oil from draining out of the filter and ensuring that the engine receives immediate lubrication upon start‑up — a critical factor for extending engine life in the stop‑and‑go driving common in Nigerian cities. The filter’s robust construction and high burst strength provide peace of mind, even in the event of a pressure spike. By choosing the genuine Sinotruk VG1500070005, you eliminate the risks associated with aftermarket filters and ensure that your engine receives the protection it was designed for.

Superior Filtration Media for Harsh Conditions

The advanced media blend in the VG1500070005 is engineered to handle high soot loads and extended oil change intervals, which are common in modern low‑emission diesel engines. Its high dirt‑holding capacity allows the filter to maintain low restriction throughout its service life, reducing the frequency of bypass valve operation and ensuring that clean oil is always supplied to critical engine components.

Easy Identification and Fitment

The VG1500070005 is clearly marked with the Sinotruk logo and part number, making it easy to verify authenticity. Its thread size and sealing surface match the original equipment exactly, so you can install it without modifications. The filter is supplied with a new sealing O‑ring for a leak‑free installation.

Explore the full catalogue of genuine Howo Parts available for your fleet, including oil filters, air filters, and fuel filters. The VG1500070005 oil filter is a vital part of that ecosystem — and with Sinotruk’s original quality, you ensure maximum engine protection and long‑term reliability for your truck.

Installation Best Practices for the VG1500070005 Oil Filter

Replacing the oil filter is a simple but crucial maintenance task. Always use a filter wrench to remove the old filter, taking care not to damage the mounting base. Clean the sealing surface on the engine block thoroughly, then apply a thin film of clean engine oil to the new filter’s O‑ring. Screw the new VG1500070005 filter onto the mounting base until the O‑ring contacts the surface, then tighten by hand an additional 3/4 to 1 turn (or to the torque specification, typically 25‑30 N·m).

After installation, refill the engine with the correct grade of oil, start the engine, and check for leaks around the filter seal. Allow the engine to run for a few minutes, then re‑check the oil level and top up if necessary. For Nigerian workshops, keeping a stock of VG1500070005 filters ensures that routine oil changes can be completed quickly, reducing vehicle downtime and maintaining engine health.

Built for Nigeria – Uncompromised Engine Protection in the Toughest Environments

Nigeria’s transport sector operates under some of the most extreme conditions on the continent — high temperatures, heavy loads, and dusty roads that can accelerate engine wear. The VG1500070005 oil filter is engineered to meet these challenges, with its high‑capacity media, durable construction, and reliable bypass and anti‑drain back valves that ensure clean oil is always delivered to the engine, regardless of the operating conditions.

Moreover, the VG1500070005 is compatible with the full range of Sinotruk and Howo engines used in Nigeria, making it a versatile replacement part for mixed fleets. By choosing genuine Sinotruk oil filters, you reduce the risk of oil‑related engine failures, extend oil change intervals, and lower overall operating costs.

Protect Your Engine Investment with the Genuine VG1500070005

The VG1500070005 oil filter is a critical component that directly influences engine longevity, performance, and reliability. Its superior filtration media, robust construction, and exact OEM fitment make it the only choice for professional fleet maintenance. By installing a genuine Sinotruk VG1500070005, you ensure that your engine receives the clean, contaminant‑free oil it needs to operate at peak efficiency, reducing wear and extending service life.

Never compromise on oil filtration with inferior aftermarket filters that can lead to premature wear, increased oil consumption, or catastrophic engine failure. Insist on the genuine VG1500070005 — the oil filter trusted by Nigeria’s leading fleet operators and workshops. With its proven durability and uncompromising quality, this component delivers the protection and reliability that keep your business moving forward.

Genuine Sinotruk VG1500070005 – Clean oil, longer engine life, and peace of mind for every kilometre.

Packaging & Shipping

Every Howo part is carefully packaged and shipped to ensure it arrives in perfect condition, ready for installation. Our professional logistics process guarantees timely delivery across Nigeria.

Secure Packaging

Each Howo part is individually wrapped in protective materials and placed in reinforced cardboard boxes to prevent damage during transit.

Dedicated Transport

We use our own Sinotruk logistics fleet for reliable delivery, ensuring parts reach customers quickly and safely across all regions of Nigeria.

Quality Inspection

Before shipping, each part undergoes final quality checks and is clearly labeled with its OEM number for easy identification.

Nationwide Distribution

Our extensive distribution network covers all major cities and rural areas in Nigeria, ensuring prompt delivery to construction sites, workshops, and businesses.

Shipping Information for Nigerian Customers

• Standard Delivery: 3-5 business days to major cities (Lagos, Abuja, Port Harcourt, Kano)

• Express Delivery: 1-2 business days available for urgent orders

• Regional Coverage: We deliver to all 36 states including remote areas

• Tracking: All shipments include real-time tracking information

Upgrade Your Sinotruk Truck Today with Howo parts!

Experience the difference with our premium quality parts. Designed for Nigeria’s unique challenges, they deliver unmatched performance, safety, and cost savings. Join countless satisfied customers who trust Sinotruk for their truck parts needs.

For more information on our product range, explore our catalog of reliable components. Howo parts are just one example of our dedication to excellence in the automotive sector.

Contact Us Now

Thank you for considering our products. We look forward to supporting your journey on Nigeria’s roads with quality and innovation.